Installing SeaCare Upload Script

To install the SeaCare QBC Upload Script, you will need to download and uncompress the “” archive on to a blank USB flash drive.

* The above archive download has been pre-configured to use "" as the assigned IP address to workstation.

If you need to change the pre-configured IP address, then proceed to do the following:

Edit the /.qbcruntime/ file.  If doing this under a windows computer, please use a *nix compatible editor like EditPad Lite to make sure windows doesn’t add carriage returns or other command characters (e.g. ^M). These extra characters will keep the script from running properly.

From within the editor you need to update the SERVER variable. This is the Static IP of the Lab Workstation.  If you changed the User/Pass of the FTP server account, then update that here too.

Once you have the USB flash drive updated and ready to install on the QBC Star, insert the USB flash drive into an available USB A port on back of the device. Then power on the device and wait until it reaches the “System Initializing” screen. Wait about 60 secs and then, you can power down the device and remove the USB flash drive.

You have now installed the SeaCare QBC Star Script.

Have more questions? Submit a request


Please sign in to leave a comment.